Understand your estimate

How to use this result

Explore how alternative assumptions change an appliance’s electricity cost or replacement payback. The three scenarios show sensitivity to entered energy, tariff and cost assumptions, not probabilities or a forecast.

Method reviewed · Calculation methods · Evidence and source policy

Find the right inputs

Scenario mode

Running cost or replacement

Choose the baseline before comparing assumptions.

Base energy and costs

Annual electrical kWh and relevant outlay

Use compatible sources and a confirmed replacement baseline.

Changed assumptions

Energy, rate and cost changes

Label lower/base/higher inputs explicitly rather than calling them likely outcomes.

The calculation

Running cost = adjusted annual kWh × adjusted tariff. Replacement savings = annual energy difference × adjusted tariff; payback needs a positive saving and relevant positive net outlay.

A worked arithmetic example

Illustrative arithmetic: 600 kWh/year at $0.20/kWh costs $120. A scenario with 20% more energy and the same rate costs $144. This shows the effect of an assumption; it is not evidence of a 20% measurement error.

What the estimate can tell you

If energy and rate both increase, their effects multiply. Keep the assumptions explicit, and treat missing future repairs or tariff changes as unknown rather than adding invented probabilities.

Questions about this calculation

Is the lower scenario a guaranteed saving?

No. It is the output for the lower entered assumptions. Whether those assumptions occur needs evidence outside the calculator.

Why does payback disappear in one scenario?

If that scenario has no positive electricity savings, a positive outlay has no electricity-savings payback. A zero net outlay is reported separately.