Understand your estimate

How to use this result

A dehumidifier’s cost can be priced from input power and time or representative complete-day kWh. Moisture-removal capacity and litres per kWh describe performance, rather than direct household energy consumption.

Method reviewed · Calculation methods · Evidence and source policy

Find the right inputs

Electrical input or measured energy

W/kW, or measured kWh

A litres/day capacity or efficiency metric is not an electricity input.

Mode and conditions

Room temperature, humidity and target

Initial drying may not represent later maintenance use.

Use days and tariff

Chosen period days and price/kWh

Measured energy already contains cycling within the observation.

The calculation

Constant-input kWh = input kW × daily hours × use days. Measured kWh = complete sample kWh ÷ sample days × selected use days. Apply the electricity price once.

A worked arithmetic example

Illustrative arithmetic: 250 W continuously for eight hours on 30 days uses 60 kWh and costs $12 at $0.20/kWh. This does not infer the amount of water removed.

What the estimate can tell you

Compare similar moisture-control tasks before ranking costs. A device enabled for 24 hours need not draw its maximum watts for every hour, and a shorter drying task may remove less water.

Questions about this calculation

Can I use a manufacturer’s maximum extraction rate to infer daily kWh?

No. That rate describes water removal under its test conditions. Use electrical input with suitable time, or an actual complete-day energy sample.

How should I record water collected?

Retain volume, energy, elapsed period and room conditions together. Cost per litre is descriptive for that observed task; it is not automatically performance in every room.